Showing posts with label Tricky OSPF Multiple choice Questions and Answers pdf. Show all posts
Showing posts with label Tricky OSPF Multiple choice Questions and Answers pdf. Show all posts

Most recently OSPF Multiple choice Questions and Answers pdf

6. What is the difference between an OPPF neighbor and an adjacent neighbor?
LSAs are exchanged only among adjacent routers not among neighbor routers.

7. What are different neighbour states in OSPF ?
OSPF routers need to go through several state before establishing a neighbor relationship -
1. Down - No Hello packets have been received on the interface.
2. Attempt - In Attempt state neighbors must be configured manually. It applies only to nonbroadcast multi-access (NBMA) networks.
3. Init - Router has received a Hello message from the other OSFP router.
4. 2way - the neighbor has received the Hello message and replied with a Hello message of his own. Bidirectional Communication has been established. In Broadcast network DR-BDR election can occur after this point.
5. Exstart - DR & BDR establish adjacencies with each router in the network. Master-slave election will takes place (Master will send its DBD first).
6. Exchange - Routing information is exchanged using DBD (Database Descriptor) packets, Link-State Request (LSR) and Link-State Update packets may also be sent.
7. Loading - LSRs (Link State Requests) are send to neighbors for every network it doesn't know about. The Neighbor replies with the LSUs (Link State Updates) which contain information about requested networks. After all the requested information have been received, other neighbor goes through the same process.
8. Full - All neighbor routers have the synchronized database and adjacencies has been established.

8. Explain different OSPF LSA Types?
1. Router LSA (Type1) - Each router generates a Type 1 LSA that lists its active interfaces, IP addresses, neighbors and the cost. LSA Type 1 is flooded only within an area.
2. Network LSA (Type2) - Type2 LSA is sent out by the designated router (DR) and lists all the routers on the segment it is adjacent to. Type 2 LSA are ?ooded only within an area.
3. Summary LSA (Type3) - Type 3 LSAs are generated by Area Border Routers (ABRs) to advertise networks from one area to the rest of the areas in Autonomous System.
4. Summary ASBR LSA (Type4) - Generated by the ABR. It contain routes to ASBRs.
5. External LSA (Type5) - External LSAs are generated by ASBRs and contain routes to networks that are external to the current Autonomous System.
6. Not-So-Stubby Area LSA (Type7) - Stub areas do not allow Type 5 LSAs. A Not So Stubby Area (NSSA) allows advertisement of Type 5 LSA as Type 7 LSAs. Type LSA is generated by an ASBR inside a Not So Stubby Area (NSSA) to describe routes redistributed into the NSSA.

9. Why master slave needs to be elected between two neighbour interface?
Master sends its DBD (Database Description) First.

10. Explain different OSPF Network types ?
2.Non-Broadcast (NBMA)
5.Point-to-multipoint non-broadcast

Read More Questions:
OSPF Interview Questions Part1
OSPF Interview Questions Part2
OSPF Interview Questions Part3
OSPF Interview Questions Part4
OSPF Interview Questions Part5